Pipe & Hose Production Applications

From specification to finished pipe

Application-specific extrusion solutions

Pipe material alone does not define a production line. Diameter, wall structure, pressure class, applicable standard, inspection method and delivery format all affect the final configuration. Select an application below to review the relevant process and equipment.

HDPE water and gas pipes with blue and yellow identification stripes in a utility trench

Water & Gas Infrastructure

HDPE Water & Gas Pipe Production

Smooth-wall HDPE pressure pipe for municipal water supply and gas distribution, configured by pipe standard, SDR class, color identification and delivery method.

Typical OD Range: 16-1200 mm
Pipe Classes: Defined by SDR and material grade
Reference Standards: ISO 4427 / EN 12201 or project standard

View Application Related Production Line

Coiled HDPE irrigation pipe connected to a farm irrigation manifold

Agriculture

HDPE Irrigation Pipe Production

Flexible PE irrigation pipe for drip, sprinkler and surface irrigation systems, normally supplied in coils for efficient transport and field installation.

Typical OD Range: 16-110 mm
Delivery Format: Coil or straight length
Selection Focus: UV stability, flexibility and wall control

View Application Related Production Line

Colored HDPE telecom microducts inside a protective bundle pipe at an access chamber

Telecommunications

HDPE Microduct & Bundle Pipe Production

Low-friction HDPE microducts and multi-channel bundle pipes protect fiber optic cable and support efficient cable jetting in telecom networks.

Typical Microduct OD: 7-32 mm
Bundle Configuration: Project-defined channel count
Selection Focus: Low friction, duct geometry and coiling

View Application Related Production Line

Installed green PPR hot and cold water pipes with red and blue identification

Building Services

PPR Hot and Cold Water Pipe Production

Single-layer PPR and multilayer PPR-GF-PPR pipe for residential and commercial hot and cold water distribution systems.

Typical OD Range: 20-160 mm
Pipe Structure: Single-layer or multilayer
Selection Focus: Roundness, layer balance and socket fusion

View Application Related Production Line

Red PE-RT and PEX underfloor heating pipe loops connected to a hydronic heating manifold

Radiant Heating & Building Services

PE-RT/PEX Underfloor Heating Pipe Production

Flexible PE-RT and process-specific PEX tubing for hydronic underfloor heating and low-temperature radiant heating systems, supplied in controlled coils for installation.

Typical Size Scope: Project-specific heating-pipe sizes
Pipe Structure: Single-layer, stripe or oxygen-barrier option
Selection Focus: Material route, dimensions, layer structure and coil format

View Application Related Production Line

Rigid PVC electrical conduit installed in a commercial building

Electrical Construction

PVC Electrical Conduit Pipe Production

Rigid PVC conduit for building wiring and cable protection, available with single, twin or multi-output tooling according to pipe size and output target.

Typical OD Range: 16-63 mm
Output Layout: Single, twin or four-output
Selection Focus: Impact, crush and flame performance

View Application Related Production Line

Socketed rigid PVC sewer pipes installed in a prepared trench

Municipal & Building Drainage

PVC Drainage & Sewer Pipe Production

Rigid PVC drainage and sewer pipe with smooth bore and socketed connections for building drainage and underground gravity sewer systems.

Typical OD Range: 20-630 mm
Connection: Solvent or rubber-ring socket
Selection Focus: Ring stiffness, socket accuracy and output

View Application Related Production Line

Transparent green fiber-reinforced PVC garden hose watering plants

Home & Garden

PVC Garden Hose Production

Flexible single-layer or fiber-reinforced PVC garden hose for watering, washdown and general low-to-medium pressure service.

Typical ID Range: 10-25 mm
Hose Structure: Single-layer or fiber reinforced
Selection Focus: Flexibility, burst pressure and coil quality

View Application Related Production Line

Orange fiber-reinforced PVC LPG hose connected with secure clamps and regulator

Fuel & Gas

PVC Gas / LPG Hose Production

Fiber-reinforced PVC hose for regulated gas and LPG connections, manufactured to the material and performance requirements of the target market.

Typical ID Range: 8-15 mm
Hose Structure: Multi-layer fiber reinforced
Selection Focus: Permeation, pressure and local compliance

View Application Related Production Line

Green PVC spiral suction hose connected to an agricultural water pump

Industrial & Agriculture

PVC Suction & Discharge Hose Production

Spiral-reinforced or steel-wire-reinforced PVC hose for pump suction, water discharge and industrial material transfer.

Typical ID Range: 20-200 mm
Reinforcement: Rigid PVC spiral or steel wire
Selection Focus: Vacuum, pressure, bend radius and abrasion

View Application Related Production Line

PA nylon tubes routed through an automotive chassis with a finished tube coil

Automotive & Pneumatic

PA Nylon Pipe Production

Precision PA11, PA12 or PA6 tube for automotive, pneumatic and engineered fluid systems requiring dimensional control and material-specific drying.

Typical OD Range: 4-50 mm
Material Options: PA11 / PA12 / PA6 by application
Selection Focus: Drying, tolerance and surface quality

View Application Related Production Line

Transparent PVC dental suction tubes with blue tips on a sterile tray

Medical & Dental

PVC Medical Hose Production

Small transparent PVC tubing for dental saliva ejectors and suction applications, configured for clean handling, visual inspection and stable dimensions.

Typical ID Range: 3-10 mm
Tube Structure: Transparent small-bore PVC tube
Selection Focus: Material compliance, cleanliness and kink control

View Application Related Production Line