Plastic Pipe Extrusion Line: Complete Selection Guide
Compare PE, PVC, PPR, hose and specialty tube processes, then match the extruder, tooling and downstream equipment to the finished pipe.
Read technical guide
Engineering knowledge base
Built for better production decisions
Each guide separates universal extrusion principles from project-specific settings, so readers can evaluate equipment and process decisions more carefully.
PPR-GF-PPR Pipe: Thermal Expansion, Layer Design and Co-Extrusion Control
How a glass-fibre-reinforced PP-R middle layer changes thermal movement, and which layer, process and qualification variables must be verified.
Read technical guide
HDPE Pipe Surface Quality: Melt, Die, Calibration and Cooling Control
A diagnostic guide to HDPE roughness, die lines, waviness, ovality and specks using measured melt, sizing, cooling and haul-off evidence.
Read technical guide
PE80 vs PE100 Pipe Grades: MRS, SDR and Material Selection
A corrected comparison of PE80 and PE100 covering MRS, design coefficients, SDR pressure calculations, wall thickness and qualification.
Read technical guide
HDPE Pipe Extrusion Production Guide: From Material to Troubleshooting
A practical guide to HDPE pipe material handling, startup, vacuum sizing, cooling, process control and defect troubleshooting.
Read technical guide
PE Pipe Identification Stripes: Standards, Limits and Co-Extrusion
How to interpret PE pipe stripes safely, verify the governing specification and configure a stable stripe co-extrusion process.
Read technical guide
HDPE Pipe SDR Ratings and Extrusion Line Configuration
Technical guide to HDPE pipe SDR ratings, wall thickness and extrusion line configuration for different SDR classes.
Read technical guideFrom process fundamentals to line configuration
Process Control
Material preparation, melt stability, sizing, cooling and coordinated line speed.
Pipe Standards
SDR relationships, permanent marking and the limits of color identification.
Equipment Selection
How pipe geometry, output and downstream handling shape the complete line.
Need a project-specific answer?
Contact Engineering Discuss your pipe and production requirements
Send the material, pipe dimensions, output target and application. Our team will use them to discuss a practical line configuration.